Typ produktu |
Česká technická norma (ČSN) |
Oznaèení zákl. dokumentu |
ČSN EN 14540 |
Zmìna/oprava/svazek |
|
Tøídicí znak |
389504 |
Katalogové èíslo |
95941 |
Název dokumentu |
Požární hadice - Izolované zploštitelné hadice pro stabilní systémy |
Anglický název |
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
Datum vydání |
01.10.2014 |
Datum ukonèení platnosti |
01.08.2018 |
Datum úèinnosti |
01.11.2014 |
Vìstník vydání (mìs/rok) |
10/14 |
Vìstník zrušení |
|
Zpùsob vydání |
ve věstníku |
Zpùsob pøevzetí originálu |
vyhlášením |
Bude pøeložena |
Ano |
Použité jazyky |
|
ICS kódy |
13.220.10 - Hašení požáru 23.040.70 - Hadice a hadicové sestavy
|
Subsektor |
|
Deskriptory |
|
Klíèová slova |
|
Harmonizace/Urèení |
Informace o harmonizovaných a urèených normách jsou zveøejnìny v Databázi harmonizovaných norem
|
Zapracované dokumenty |
Oznaèení | Rok vydání |
EN 14540 | 2014 |
|
Zmìny |
|
Opravy |
|
Nahrazuje dokumenty |
Katalogové èíslo | Oznaèení | Rok vydání |
80016 | ČSN EN 14540+A1 | 2007 |
|
Byla nahrazena dokumenty |
Katalogové èíslo | Oznaèení | Rok vydání |
505274 | ČSN EN 14540 | 2018 |
|
Anotace |
ČSN EN 14540 (38 9504) This European Standard specifies the requirements and test methods for non-percolating layflat hoses for fixed systems. The hoses are intended for use at a maximum working pressure of 1,5 MPa over a range of inside diameters from 25 mm to 52 mm. This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at a minimum ambient temperature of -20 °C in normal conditions, and a minimum temperature of -30 °C in colder climatic conditions and a maximum ambient temperature of +60 °C. Hoses conforming to this standard should be used with fire hose couplings conforming to the relevant national standards for couplings. NOTE 1 - Hoses for use at ambient temperatures below -20 °C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f). Hoses in marine applications and/or aggressive environments to be used with wall hydrants as specified in EN 671-2 can conform to the requirements of this standard. NOTE 2 - All pressures are gauge pressures and are expressed in megapascals . |