Detailní informace o produktu

Typ produktu Česká technická norma (ČSN)
Označení zákl. dokumentu ČSN ETSI EN 300 330 V2.1.1
Změna/oprava/svazek
Třídicí znak 875026
Katalogové číslo 502432
Název dokumentu Zařízení krátkého dosahu (SRD) - Rádiová zařízení v kmitočtovém rozsahu 9 kHz až 25 MHz a systémy s indukční smyčkou v kmitočtovém rozsahu 9 kHz až 30 MHz - Harmonizovaná norma pokrývající základní požadavky článku 3.2 Směrnice 2014/53/EU
Anglický název Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
Datum vydání 01.09.2017
Datum ukončení platnosti
Datum účinnosti 01.10.2017
Věstník vydání (měs/rok) 9/17
Věstník zrušení
Způsob vydání ve věstníku
Způsob převzetí originálu vyhlášením
Bude přeložena Ne
Použité jazyky
ICS kódy 33.060.99 - Ostatní zařízení pro radiokomunikace
33.100.01 - Elektromagnetická kompatibilita obecně
TNK 96
Subsektor
Deskriptory
Klíčová slova
Harmonizace Harmonizovaná
Určení
Zapracované dokumenty
ShodaOznačeníRok vydání
idtETSI EN 300 330 V2.1.12017
Změny
Opravy
Nahrazuje dokumenty
Byla nahrazena dokumenty
Anotace

ČSN ETSI EN 300 330 V2.1.1 The present document specifies technical characteristics and methods of measurements for the following Short Range Device major equipment types: 1) Generic Short range Devices including transmitters and receivers operating in the range from 9 kHz to 25 MHz; and 2) inductive loop transmitters and receivers operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID), Near Field Communication (NFC) and Electronic Article Surveillance (EAS) operating in LF and HF ranges. Also the present document covers fixed, mobile and portable stations. NOTE: If a system includes transponders, these are measured together with the transmitter. The frequency ranges and limits of the present document are based on the European Commission Decision for SRDs [i.10], CEPT/ERC/REC 70-03 [i.1]. When selecting parameters for new SRDs, which may have inherent safety of human life implications, manufacturers and users should pay particular attention to the potential for interference from other systems operating in the same or adjacent bands. The radio equipment, covered by the present document is divided into several classes which are dependent on the antenna used (see annex B). Three types of measuring methods are defined in the present document due to the varied nature of the antenna types for equipment used in this band. One method measures the RF carrier current, another measures the radiated H-field and the third conducted power. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.4] under the conditions identified in annex A.